Kitchen Floors
Quartz and urethane floor systems for kitchens, bars and food plants. Coved at the walls, sealed at the drains and textured for wet floors.
Learn More
A quartz epoxy floor is colored quartz grains set into an epoxy base coat, then sealed under clear coats. The grains leave a sandy texture that holds its grip when the floor gets wet. It is one of the finishes we install as part of our epoxy flooring in Houston.
Quartz suits floors that stay wet or take hard traffic, like commercial kitchens, restrooms, locker rooms and parking garages. At home, it is an option for epoxy garage floors and workshops that need more grip than flake. Every job starts with diamond grinding and a moisture test on the bare slab. We have installed floor coatings in Houston since 2008.
Tell us about the job. We will get right back to you.
Prep comes first. We diamond grind the slab and repair cracks and joints. Then we test the concrete for moisture, and a vapor barrier primer goes down when the reading calls for one.
Next, an epoxy base coat is rolled onto the slab. While it is still wet, our crews broadcast colored quartz into it until the surface looks dry. Installers call that broadcasting to refusal. Once the base cures, we sweep and vacuum up the loose grains.
Clear coats go on last and lock the quartz in. A thin clear coat keeps the sandy profile, which gives the most grip underfoot. A thicker coat fills more of that profile, so the floor feels smoother and mops easier. Floors that take heavy traffic can get a second broadcast layer before the final coat.
Our quartz blends include Port Wine, Peppermint, Shawnee Red, Sky, Blue Coral, Pinto and Desert Sand. We also install Chocolate, Cinnamon, Granite, Sahara, Salt and Pepper, Smoke and Black Pearl. You pick the blend from samples at the free estimate.
Commercial kitchens are a natural fit, since the floor gets wet all day. We have installed a commercial kitchen floor in the Port Wine blend. The coved edges and drain details of a full kitchen build are on our commercial kitchen floors page. Showrooms and other product display areas are a good fit too.
Across Greater Houston, quartz goes where tires and wet shoes meet the floor. We have coated a commercial parking garage floor in the Salt and Pepper blend. Quartz is one of three ways we build grip into a floor. The other two, an aluminum oxide additive and a textured topcoat, are on our anti-slip floor coatings page.
A flake epoxy floor uses the same broadcast idea with flat vinyl chips. Flake leaves a light texture and hides patches in the slab, and it is the finish most home garages get. Quartz comes as sand-like grains, so the surface can stay rougher and hold more grip. That makes quartz the pick for rooms that stay wet.
Metallic epoxy floors go the other way. Pigment is worked into clear epoxy for a smooth, marbled look in a living room or a foyer. A solid color epoxy floor is one even color under a clear topcoat. Both start smooth, and a fine grit in the topcoat adds some grip.
Every finish starts with the same prep and moisture test. Where sun hits the floor, we can finish with a UV stable polyaspartic topcoat, which does not yellow. Quartz also goes into our commercial epoxy flooring where a walkway or loading area needs grip.
Free, no-obligation estimates across Greater Houston, from Conroe to Alvin.
(281) 831-5656From the first call or text to the walk-through on the finished floor, here is how it goes.
Reach us at (281) 831-5656 and tell us about the floor. We book estimates on weekdays.
We measure the slab, look at its condition and run a moisture test. Then you get a quote for the system we recommend.
Pick the color and finish from samples. Options include full flake, solid color, quartz and metallic.
We diamond grind the slab and repair cracks and joints. A vapor barrier primer goes down when the moisture test calls for it. Then comes the base coat, the flake or pigment broadcast, and the clear topcoat.
Most garages are a two-day job, and a metallic floor takes about three days. We do a final walk-through and tell you when to drive on the floor.
Common questions about quartz floors across Greater Houston, from Conroe to Alvin. If yours is not here, call or text and ask.
Quartz and urethane floor systems for kitchens, bars and food plants. Coved at the walls, sealed at the drains and textured for wet floors.
Learn More
Vinyl flake broadcast into an epoxy base coat, then locked under a clear topcoat. The chips hide slab flaws and add grip, and it is the finish most Houston garages get.
Learn More
Slip-resistant coatings for floors that get wet or see heavy traffic. We build the grip into the floor with a quartz broadcast, an aluminum oxide additive or a textured topcoat.
Learn MoreMore than 3.5 million square feet of floor coatings are down across Greater Houston. Four crews keep the schedule moving.
Epoxy, polyaspartic and polyurea come from one company. We match the build to your slab, your use and your schedule.
We look at the slab, measure it and run a moisture test before we quote. Quotes often come back within a day.
The work is backed by a written warranty. Ask us for the terms, and we stand behind the work.
Real reviews from real floor coating jobs on Google, garages to hangars.
These guys did my garage floor back in November, Pablo really knows the technical knowledge and recommend a vapor barrier to be put down first. 3 months in and it still looks brand new. Went with Folsom color choice. Super easy to work with and plan around the drywall crew. Highly recommended!
I work for a custom home builder in the Houston area and we have been using Xpedite Coating for many years on our garage epoxy floors. They are very professional and timely and always leave the site clean after they are finished. I would highly recommend them for your next epoxy flooring need.
I used Xpedite Coatings twice to finish my epoxy flake garage floor at 2 properties. This guy is professional at what they do. The crew came and finished the job in a timely manner. The results look great and price is competitive. Highly recommended.
Tell us about your floor and we will come out, look at the slab and price it. Call or text (281) 831-5656, or send the form and we will follow up.
Tell us about the job. We will get right back to you.
