Garage Floors
Full flake, solid color or metallic finishes over an epoxy base, topped with a clear coat. Most Houston garages are a two-day job.
Learn More
A solid color epoxy floor is one even color from wall to wall. A pigmented epoxy base coat goes down over the ground slab, and a clear topcoat seals it. No chips, no metallic swirl, just a clean surface in the color you pick. It is the finish that makes a garage, a shop or a warehouse read as one floor. We install it across Greater Houston as part of our epoxy flooring work.
Most people pick a gray, a tan or a white, and the color chart below shows the standard range. Safety yellow, red and blue are there for borders and walkways on a commercial floor. Epoxy One has coated floors in Houston since 2008, and we bring the color samples to the free estimate so you can hold them against your walls and your car. Call or text (281) 831-5656.
Tell us about the job. We will get right back to you.
It is the plainest build we do, and often the right one. After the slab is ground and repaired, a pigmented epoxy base coat is rolled on. That coat carries the color. Once it cures, a clear topcoat goes over it, and that clear coat is what takes the wear, the hot tires and the mopping.
The topcoat also sets the sheen. Gloss reflects the lights and reads like a showroom. Satin cuts the glare in a room with big windows. Flat hides scuffs on a shop floor that gets hard use. We match the sheen to the space when we quote the job.
A solid color floor does one thing a flake epoxy floor does not. It shows the slab underneath. Ripples, patches and old crack repairs all read through an even color, so the prep has to be right before the color goes down. That is why we grind every slab and fill every crack first.
Gray is the most common pick for a garage or a warehouse. Concrete gray and delta fog look like clean concrete, and sterling and slate run darker and hide tire marks better. The tans, from bone and flaxen to wheat, sand and buff, warm up a garage that opens onto a beige or brick home. Thatch brown, adobe, red brick and seattle red suit a porch, a workshop or a floor that needs to match a brand.
White and light colors bounce light. The hangar floors we coated for the Lone Star Flight Museum are high gloss white, and a customer wrote that the museum moves 40 or more planes a month across them. The same idea works in a detail shop or a home gym where you want the room bright.
On a commercial floor the color does a job. Safety yellow, red and blue go down as borders, aisle lines and walkways over a gray field, so traffic lanes read at a glance. We lay those out with the plant or warehouse manager before the first coat, and we build the same striping into commercial epoxy flooring across west Houston, Katy and Sugar Land.
A Houston garage runs hot and humid most of the year, and the door lets in direct sun for hours a day. Plain epoxy yellows in that light, so the color coat is never the top layer. A UV stable polyurethane or polyaspartic topcoat goes over it and holds the color. Lighter colors also show yellowing sooner than dark ones, so a white or bone garage floor needs that clear coat most.
Most Houston homes sit on slab-on-grade concrete over Gulf Coast clay, which swells and shrinks with the weather. Slabs move, hairline cracks open, and moisture pushes up through the concrete as vapor. Moisture is the top reason a floor coating fails here, so we test every slab and prime with a vapor barrier when the reading calls for it.
Most garages are a two-day job. Day one is the grinding, the repairs and the moisture test. Day two is the color coat and the clear topcoat. We coat garages in new custom homes for about 200 Houston area builders, and a solid color is often what the builder specs, because it goes with any finish the buyer picks later. The work is backed by a written warranty. Ask us for the terms.
Free, no-obligation estimates across west Houston, the suburbs and up to The Woodlands.
(281) 831-5656Sixteen standard colors. Grays and tans are most of what goes into garages, the browns and reds suit porches and workshops, and the safety colors mark walkways and borders on commercial floors. We bring the sample cards to the free estimate so you can hold them against your walls.
A base coat can be tinted closer to a specific shade on request. Colors on a screen shift, so the sample card is the reference.
From the first call or text to the walk-through on the finished floor, here is how it goes.
Reach us at (281) 831-5656 and tell us about the floor. We book estimates on weekdays.
We measure the slab, look at its condition and run a moisture test. Then you get a quote for the system we recommend.
Pick the color and finish from samples. Options include full flake, solid color, quartz and metallic.
We diamond grind the slab and repair cracks and joints. A vapor barrier primer goes down when the moisture test calls for it. Then comes the base coat, the flake or pigment broadcast, and the clear topcoat.
Most garages are a two-day job, and a metallic floor takes about three days. We do a final walk-through and tell you when to drive on the floor.
Common questions about solid color floors across west Houston, the suburbs and up to The Woodlands. If yours is not here, call or text and ask.
Full flake, solid color or metallic finishes over an epoxy base, topped with a clear coat. Most Houston garages are a two-day job.
Learn More
Vinyl flake broadcast into an epoxy base coat, then locked under a clear topcoat. The chips hide slab flaws and add grip, and it is the finish most Houston garages get.
Learn More
Epoxy floor systems for warehouses, aircraft hangars, auto shops, showrooms and plant floors. Safety striping, walkways and logos go right into the floor.
Learn MoreMore than 3.5 million square feet of floor coatings are down across Greater Houston. Four crews keep the schedule moving.
Epoxy, polyaspartic and polyurea come from one company. We match the build to your slab, your use and your schedule.
We look at the slab, measure it and run a moisture test before we quote. Quotes often come back within a day.
The work is backed by a written warranty. Ask us for the terms, and we stand behind the work.
Real reviews from real floor coating jobs on Google, garages to hangars.
These guys did my garage floor back in November, Pablo really knows the technical knowledge and recommend a vapor barrier to be put down first. 3 months in and it still looks brand new. Went with Folsom color choice. Super easy to work with and plan around the drywall crew. Highly recommended!
I work for a custom home builder in the Houston area and we have been using Xpedite Coating for many years on our garage epoxy floors. They are very professional and timely and always leave the site clean after they are finished. I would highly recommend them for your next epoxy flooring need.
I used Xpedite Coatings twice to finish my epoxy flake garage floor at 2 properties. This guy is professional at what they do. The crew came and finished the job in a timely manner. The results look great and price is competitive. Highly recommended.
Tell us about your floor and we will come out, look at the slab and price it. Call or text (281) 831-5656, or send the form and we will follow up.
Tell us about the job. We will get right back to you.