Garage Floors
Full flake, solid color or metallic finishes over an epoxy base, topped with a clear coat. Most Houston garages are a two-day job.
Learn More
Hand worked metallic epoxy in garages, kitchens, living rooms and showrooms, all our own installs. Tap a photo to see it full screen.
Metallic pigment comes in dozens of colors, and most floors use two or three worked together over a solid color base. This is the sample board and the pigment deck we bring to the estimate. Every metallic floor is hand worked, so a sample shows the color, not the pattern.
Darker bases read deep and glossy, lighter pearls open up a room. We pour a small sample of your combination before the crew starts.
A metallic epoxy floor starts with a solid color epoxy base over prepared concrete. Over that we pour a clear epoxy carrying metallic pigment, then work it by hand. The pigment drifts and settles as the resin levels out, and a marble pattern appears. It is one of the finishes we install as part of epoxy flooring in Houston.
Some customers call it liquid marble. No two floors come out alike, because the pattern forms while the resin is still wet. We install them in entryways, living areas, media rooms, restaurants, bars and event halls. A metallic finish is one of the choices on our epoxy garage floors.
Tell us about the job. We will get right back to you.
The base coat goes down first, in a solid color that hides the gray concrete. Once it cures overnight, we mix metallic pigment into clear epoxy and pour it over the base. The pigment is a fine mica powder that reflects light, and it moves as the resin spreads.
From there it is hand work. Our crews pull the wet resin with squeegees and rollers, then move air across it. That opens veins and cells, and the pigment separates into light and dark ribbons. The pattern locks in as the epoxy levels out and cures.
Every metallic floor is one of a kind for that reason. We steer the color and the general pattern, and you pick both from samples first. The exact veining lands where the resin takes it.
Color comes first. We bring samples in coppers, bronzes, pearls, graphites, gunmetals, blues and greens. You pick a base color and the metallics that run through it. Darker bases read deep and glossy, and lighter pearls open up a room.
A metallic floor usually takes about three days. Day one is prep: we diamond grind the slab, repair cracks and joints, and test the slab for moisture. Days two and three are the base coat, the metallic layer and the clear topcoat. Cure time sits between the coats, so plan on staying off the floor.
Room size and slab condition can move that schedule, and we give you the dates at the estimate. The products we use are low odor. The work is backed by a written warranty. Ask us for the terms.
We have coated floors across Greater Houston since 2008, and every job starts at the slab. Most Houston homes sit on a slab over Gulf Coast clay that swells and shrinks. Slabs move, crack and push moisture vapor up through the concrete. Moisture is the number one reason a coating fails here, so we test before we quote.
Inside a home, metallic floors go in entries, living rooms, kitchens, media rooms and home offices. On the commercial side they fit showrooms, lobbies, bars and event spaces. We have put them in a restaurant dining room, a ballroom, an office and a collector's garage. A warehouse or shop floor is usually better served by commercial epoxy flooring.
Sun matters too. A room with big west windows, or a garage with the door open, gets hard light. A polyaspartic topcoat holds its color where plain epoxy would yellow. We put that clear coat over metallic floors in sun exposed rooms.
Free, no-obligation estimates across Greater Houston, from Conroe to Alvin.
(281) 831-5656From the first call or text to the walk-through on the finished floor, here is how it goes.
Reach us at (281) 831-5656 and tell us about the floor. We book estimates on weekdays.
We measure the slab, look at its condition and run a moisture test. Then you get a quote for the system we recommend.
Pick the color and finish from samples. Options include full flake, solid color, quartz and metallic.
We diamond grind the slab and repair cracks and joints. A vapor barrier primer goes down when the moisture test calls for it. Then comes the base coat, the flake or pigment broadcast, and the clear topcoat.
Most garages are a two-day job, and a metallic floor takes about three days. We do a final walk-through and tell you when to drive on the floor.
Common questions about metallic floors across Greater Houston, from Conroe to Alvin. If yours is not here, call or text and ask.
Full flake, solid color or metallic finishes over an epoxy base, topped with a clear coat. Most Houston garages are a two-day job.
Learn More
Vinyl flake broadcast into an epoxy base coat, then locked under a clear topcoat. The chips hide slab flaws and add grip, and it is the finish most Houston garages get.
Learn More
We coat the bare concrete slab in living rooms, kitchens, foyers, media rooms and home gyms. Choose solid color, metallic, flake or quartz, all installed with low-odor products.
Learn MoreMore than 3.5 million square feet of floor coatings are down across Greater Houston. Four crews keep the schedule moving.
Epoxy, polyaspartic and polyurea come from one company. We match the build to your slab, your use and your schedule.
We look at the slab, measure it and run a moisture test before we quote. Quotes often come back within a day.
The work is backed by a written warranty. Ask us for the terms, and we stand behind the work.
Real reviews from real floor coating jobs on Google, garages to hangars.
These guys did my garage floor back in November, Pablo really knows the technical knowledge and recommend a vapor barrier to be put down first. 3 months in and it still looks brand new. Went with Folsom color choice. Super easy to work with and plan around the drywall crew. Highly recommended!
I work for a custom home builder in the Houston area and we have been using Xpedite Coating for many years on our garage epoxy floors. They are very professional and timely and always leave the site clean after they are finished. I would highly recommend them for your next epoxy flooring need.
I used Xpedite Coatings twice to finish my epoxy flake garage floor at 2 properties. This guy is professional at what they do. The crew came and finished the job in a timely manner. The results look great and price is competitive. Highly recommended.
Tell us about your floor and we will come out, look at the slab and price it. Call or text (281) 831-5656, or send the form and we will follow up.
Tell us about the job. We will get right back to you.
