Epoxy Flooring
Epoxy floor coating systems for Houston homes and businesses, with the concrete prep, the moisture check and a topcoat chosen for the space.
Learn More
Epoxy garage floors in Friendswood start with slabs that have some age on them. The Census Bureau counts 12,354 single-family detached homes in the city, more than four of every five housing units. The median home was built in 1990, so about half the homes in town date to 1990 or earlier. Many carry decades of cracks, settling and oil stains.
Epoxy One has installed floor coatings across Greater Houston since 2008, from our Memorial office in Houston. We lead with epoxy garage floors and also install polyaspartic, polyurea, metallic and flake systems, plus commercial epoxy flooring. Call or text (281) 831-5656 for a free estimate.
Tell us about the job. We will get right back to you.
Friendswood began as a Quaker colony, and it is the only permanent town in Texas that started that way. The settlers bought their land in 1895, land drained by four creeks: Chigger, Coward's, Mary's and Clear. They named the town for the Friends, and the city incorporated in 1960.
NASA's Manned Spacecraft Center opened ten miles away in 1962. People began commuting to the space center or to Houston, and Friendswood became a bedroom suburb. The town had 1,675 residents in 1968, 13,585 by 1980 and 22,814 by 1990. The Census now counts 40,827 people in 14,985 housing units.
That growth left a lot of garage slabs poured in the 1970s and 1980s. An older slab can carry cracks, settling, oil stains and worn paint or sealer. Our crews diamond grind every slab, which takes off old coatings and opens fresh concrete for the epoxy. Cracks get filled and joints get repaired before any coating goes on.
Annalea, with its Kingspark and Whitehall sections, is among the original subdivisions in town, with homes from the late 1960s. Forest Bend, Sunmeadow, Heritage Park, Falcon Ridge Estates and The Forest of Friendswood are other Friendswood subdivisions. West Ranch keeps adding new sections, and Friendswood Trails near FM 518 is a new community.
A flake epoxy floor is the most common finish we install in two- and three-car garages. The flake hides small flaws in an older slab, and a clear topcoat makes the floor easy to clean. A metallic epoxy floor suits a media room or a collector's garage, and no two come out alike.
About 200 custom home builders in the Houston area use us for their garage floors. On a new build, our crews schedule around the other trades. A Google review from a custom builder's employee says our crews "always leave the site clean." Polly Ranch calls itself a private airstrip community; if you keep a plane there, ask about hangar floor coatings.
Clear Creek splits Friendswood between two counties. Students south of the creek, on the Galveston County side, attend Friendswood ISD. Students north of it, on the Harris County side, attend Clear Creek ISD. Major flooding in town comes from the rise of Clear Creek.
During Hurricane Harvey in 2017, the National Hurricane Center reported record water levels on Clear Creek. Its report lists catastrophic flooding in League City, Friendswood and Dickinson, with FM 528 and FM 518 under water. If water ever stood in your garage, the slab can hold moisture after the surface looks dry.
Moisture rising through a slab is the top reason coatings fail around Houston. We test every slab before the base coat. A high reading means a moisture vapor barrier primer goes down first. For the full story, read why epoxy floors peel in Houston.
The air stays humid most of the year here, and the summer sun is strong. For patio coatings, we start with an epoxy base and finish with a polyaspartic topcoat. Polyaspartic cures in high humidity and does not yellow in full sun. A polyurea floor coating stays flexible, which suits shops and outdoor slabs.
Friendswood sits on FM 518, which runs through town as Friendswood Drive. Most of the shopping and dining in town lines FM 518 and FM 2351. We coat floors for auto shops and service bays, retail stores, restaurants, offices and warehouses.
Our commercial floors typically run 2 to 3 millimeters thick. Shop and warehouse floors can take safety striping, and a custom logo can go into the floor itself. Ramps and wet areas can take an anti slip floor coating with quartz or aluminum oxide in the finish.
Friendswood sits about 28 miles southeast of our Memorial office, straight line. Estimates are free, and quotes often come back within a day. Epoxy One has installed more than 3.5 million square feet of floor coatings across Greater Houston. We are rated 4.6 by 140 Google reviewers, and the work is backed by a written warranty; ask us for the terms.
Communities and areas we serve around Friendswood: Polly Ranch, Annalea, Forest Bend, Sunmeadow, Heritage Park, Falcon Ridge Estates, The Forest of Friendswood, West Ranch, Friendswood Trails, Sterling Creek.
Friendswood ZIP codes served: 77546.
Free estimates throughout Galveston and Harris Counties and the surrounding area.
(281) 831-5656
Epoxy floor coating systems for Houston homes and businesses, with the concrete prep, the moisture check and a topcoat chosen for the space.
Learn More
Full flake, solid color or metallic finishes over an epoxy base, topped with a clear coat. Most Houston garages are a two-day job.
Learn More
Polyaspartic floor coatings cure fast and hold their color in the sun. We install them as the clear coat over an epoxy base, or as a full one day system.
Learn More
Polyurea floor coatings cure fast and stay flexible under hard use. We install them over an epoxy base, or as a full system when the schedule is tight.
Learn More
Metallic pigment worked into clear epoxy, poured over a solid color base. Every floor comes out one of a kind, and most take about three days.
Learn More
Vinyl flake broadcast into an epoxy base coat, then locked under a clear topcoat. The chips hide slab flaws and add grip, and it is the finish most Houston garages get.
Learn More
A pigmented epoxy base under a clear topcoat, in one even color from bone and tan to gray, slate and safety red. The simplest finish we install, and the one that makes a garage or shop read as one clean surface.
Learn More
Colored quartz broadcast into an epoxy base coat, then sealed under clear coats. The grains give the floor grip, and the clear coats set how sandy or smooth it feels.
Learn More
Epoxy floor systems for warehouses, aircraft hangars, auto shops, showrooms and plant floors. Safety striping, walkways and logos go right into the floor.
Learn More
Coated floors for T-hangars, corporate hangars, maintenance hangars and museum hangars across Greater Houston. We build them on an epoxy base with a tough topcoat, plus striping and logos if you want them.
Learn More
Quartz and urethane floor systems for kitchens, bars and food plants. Coved at the walls, sealed at the drains and textured for wet floors.
Learn More
Slip-resistant coatings for floors that get wet or see heavy traffic. We build the grip into the floor with a quartz broadcast, an aluminum oxide additive or a textured topcoat.
Learn More
Acid stains and dyes put the color inside the slab, then a sealer takes the wear. We stain and seal interior floors, porches, patios and driveways across Greater Houston.
Learn More
Acid stain soaks into your existing driveway and turns plain gray concrete a lasting earth tone. A clear sealer over the color stands up to tires and weather.
Learn More
We coat the bare concrete slab in living rooms, kitchens, foyers, media rooms and home gyms. Choose solid color, metallic, flake or quartz, all installed with low-odor products.
Learn More
We coat backyard patios, covered patios, porches and entry steps with an epoxy base and a UV stable topcoat. Full flake is the usual finish, and grit in the topcoat adds grip when wet.
Learn MoreReal reviews from real floor coating jobs on Google, garages to hangars.
These guys did my garage floor back in November, Pablo really knows the technical knowledge and recommend a vapor barrier to be put down first. 3 months in and it still looks brand new. Went with Folsom color choice. Super easy to work with and plan around the drywall crew. Highly recommended!
I work for a custom home builder in the Houston area and we have been using Xpedite Coating for many years on our garage epoxy floors. They are very professional and timely and always leave the site clean after they are finished. I would highly recommend them for your next epoxy flooring need.
I used Xpedite Coatings twice to finish my epoxy flake garage floor at 2 properties. This guy is professional at what they do. The crew came and finished the job in a timely manner. The results look great and price is competitive. Highly recommended.
We used Xpedite to epoxy our garage floor. Of the 4 quotes we received theirs was not only the best but the most honest. Rather than try to upsell us on a premium product or more square foot coverage they recommended a more modest plan given our use case, and we're transparent about the liters of product they would be using. They were fast and clean, and the garage floor looks beautiful!
Jose Pablo has done three garages for my family. Each one as beautiful and functional as the next. This time we did all white and it's phenomenal. The company did the floors for the Lonestar Flight Museum, so if the floors they made stay white and clean and withstand the traffic of moving 40 or more planes per month, my garage with my little comings and goings will be just right.
I am a wedding venue owner and was in need of replacing our floors. I got over 10 quotes from different flooring companies. Pablo had very competitive pricing and had way more knowledge than any other floor company that i interviewed. His guys did a great job on the flooring. We had to do some additional work afterwards on it based on the usage of our floors and Pablo went above and beyond to make sure that the floors were exactly how we needed them to be for our clientele. He is trustworthy and extremely professional and goes above and beyond for his clients! Use him for your floor project you will not regret it!
A few of the questions we hear most around Friendswood. If yours is not here, call or text and ask.
Tell us about your floor and we will come out, look at the slab and price it. Call or text (281) 831-5656, or send the form and we will follow up.
Tell us about the job. We will get right back to you.