How Much Does a Metallic Epoxy Floor Cost in Houston?
In Houston, a metallic epoxy system commonly runs about $7.50 to $10 per square foot installed. At that rate, a 400 square foot two-car garage comes to about $3,000 to $4,000. A 1,000 square foot living area comes to about $7,500 to $10,000.
Those are market numbers, not our price list. National cost guides for 2026 put professionally installed metallic at $8 to $12 and $8 to $15 per square foot. Materials alone run $3 to $7. A metallic finish adds about $2 to $5 per square foot over a standard solid color or flake floor.
What does metallic epoxy cost per square foot?
Most metallic epoxy flooring cost is quoted per square foot. The Houston range starts just under the national figures and tops out below their high end.
| Published range | Metallic epoxy per square foot |
|---|---|
| Houston market | $7.50 to $10 installed |
| A 2026 national garage cost guide | $8 to $15 installed |
| A second 2026 national guide page | $8 to $12 installed |
| A national cost guide’s Houston page | $8 to $12 |
| Materials alone, national guides | $3 to $7 |
The price covers more than the pigment. A metallic floor is clear epoxy carrying metallic pigment, worked by hand into marble, veined or flowing patterns. Every floor is one of a kind. Our metallic epoxy floors page shows the finish and how it goes down.
Every job also includes the concrete prep and the finish coat. The installed number covers both.
What does a metallic floor cost by room or garage size?
Size does most of the math. The Houston column applies the $7.50 to $10 range. The national column applies the full $8 to $15 span from the two 2026 guides.
| Space | Size | Houston range | National guides |
|---|---|---|---|
| Foyer or single room | 200 sq ft (example) | $1,500 to $2,000 | $1,600 to $3,000 |
| Two-car garage | 400 to 500 sq ft | $3,000 to $5,000 | $3,200 to $7,500 |
| Three-car garage | 600 sq ft (example) | $4,500 to $6,000 | $4,800 to $9,000 |
| Living area | 1,000 sq ft | $7,500 to $10,000 | $8,000 to $15,000 |
The cost of a metallic epoxy floor per square foot usually drops as the floor gets bigger. A national guide notes that larger garages cost less per square foot. Setup and crew time spread across more area. A national cost guide’s Houston page puts metallic or quartz lobbies and showrooms near $6 to $8 per square foot.
Inside a home, metallic is one finish for interior epoxy floors in living areas, foyers, kitchens and media rooms. In a garage, it is the premium pick for an epoxy garage floor. Every garage finish is priced side by side in epoxy garage floor cost in Houston.
What drives the price of a metallic epoxy floor?
Several things move the metallic epoxy price inside those ranges. Prep comes first. Diamond grinding opens the concrete so the coating can bond. Cracks and joints get repaired before any color goes down.
A national epoxy cost guide prices the common extras on their own lines.
| Add-on | Published range |
|---|---|
| Crack repair | $25 to $250 |
| Old coating removal | $1 to $3 per sq ft |
| Moisture mitigation primer | $2 to $4 per sq ft |
| Clear topcoat | $1 to $3 per sq ft |
| Clearing the garage | $100 to $200 |
Slab moisture. Every job includes a moisture test. When the reading runs high, a moisture vapor barrier primer goes down before the base coat. When slab vapor runs past what a coating can take, the coating lets go from underneath. Here is why epoxy floors peel in Houston.
The pattern. More colors and a busier pattern mean more hand work. Marble and vein patterns form while the epoxy is wet, so every floor is one of a kind. You pick the colors from samples before the work starts.
The topcoat. A clear polyurethane topcoat is one choice. A polyaspartic topcoat is UV stable, so it does not yellow where sun hits the floor. A 2026 national guide calls polyaspartic its most expensive liquid coating option.
Interior extras. A room has to be cleared before the crew starts. Baseboards and the edges where the coating meets tile, wood or carpet take extra care.
The schedule. A metallic floor usually takes about three days. Day one is prep, then two days go to coats and cure. Plan on staying off the floor until the crew hands it back.
Can you install a metallic epoxy floor yourself?
You can, but metallic is the hardest finish to do yourself. The pigment is worked by hand while the epoxy is still wet. A national garage guide lists a premium finish such as metallic as a reason to hire a professional.
Materials alone run $3 to $7 per square foot in national guides. On a 400 square foot garage, that is about $1,200 to $2,800 before any grinding or crack repair. Store-bought epoxy kits are rated 2 to 5 years, against 10 to 20 years for a professional install.
Prep is the other gap. The same guide says surface prep is 80 percent of what decides whether an epoxy floor succeeds or fails. Most kits call for an acid etch instead of diamond grinding. The guide also notes that DIY kits never mention moisture testing.
Is a metallic floor worth the cost?
It depends on the room. A 2026 national garage guide rates professionally installed metallic epoxy at 10 to 20 years. At the Houston range, a 400 square foot floor runs about $3,000 to $4,000. Spread over 10 to 20 years, that is about $150 to $400 a year.
Metallic fits best where the floor is on display, such as a foyer, living area, kitchen or media room. In a working garage, a flake floor hides slab flaws and costs less. Where sun hits the floor, a polyaspartic topcoat holds its color. Our post on polyaspartic floor coating cost covers that side of the math.
How do you get a real number for your floor?
Every figure above is a market range, not a quote. We price a metallic floor after we measure it and test the slab. Estimates are free, and quotes often come back within a day.
Call or text (281) 831-5656 to set one up. The patterns and the three-day build are on our metallic epoxy floors page.